ryujinx/ARMeilleure/IntermediateRepresentation/Operand.cs

524 lines
16 KiB
C#
Raw Normal View History

Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
using ARMeilleure.Common;
Add multi-level function table (#2228) * Add AddressTable<T> * Use AddressTable<T> for dispatch * Remove JumpTable & co. * Add fallback for out of range addresses * Add PPTC support * Add documentation to `AddressTable<T>` * Make AddressTable<T> configurable * Fix table walk * Fix IsMapped check * Remove CountTableCapacity * Add PPTC support for fast path * Rename IsMapped to IsValid * Remove stale comment * Change format of address in exception message * Add TranslatorStubs * Split DispatchStub Avoids recompilation of stubs during tests. * Add hint for 64bit or 32bit * Add documentation to `Symbol` * Add documentation to `TranslatorStubs` Make `TranslatorStubs` disposable as well. * Add documentation to `SymbolType` * Add `AddressTableEventSource` to monitor function table size Add an EventSource which measures the amount of unmanaged bytes allocated by AddressTable<T> instances. dotnet-counters monitor -n Ryujinx --counters ARMeilleure * Add `AllowLcqInFunctionTable` optimization toggle This is to reduce the impact this change has on the test duration. Before everytime a test was ran, the FunctionTable would be initialized and populated so that the newly compiled test would get registered to it. * Implement unmanaged dispatcher Uses the DispatchStub to dispatch into the next translation, which allows execution to stay in unmanaged for longer and skips a ConcurrentDictionary look up when the target translation has been registered to the FunctionTable. * Remove redundant null check * Tune levels of FunctionTable Uses 5 levels instead of 4 and change unit of AddressTableEventSource from KB to MB. * Use 64-bit function table Improves codegen for direct branches: mov qword [rax+0x408],0x10603560 - mov rcx,sub_10603560_OFFSET - mov ecx,[rcx] - mov ecx,ecx - mov rdx,JIT_CACHE_BASE - add rdx,rcx + mov rcx,sub_10603560 + mov rdx,[rcx] mov rcx,rax Improves codegen for dispatch stub: and rax,byte +0x1f - mov eax,[rcx+rax*4] - mov eax,eax - mov rcx,JIT_CACHE_BASE - lea rax,[rcx+rax] + mov rax,[rcx+rax*8] mov rcx,rbx * Remove `JitCacheSymbol` & `JitCache.Offset` * Turn `Translator.Translate` into an instance method We do not have to add more parameter to this method and related ones as new structures are added & needed for translation. * Add symbol only when PTC is enabled Address LDj3SNuD's feedback * Change `NativeContext.Running` to a 32-bit integer * Fix PageTable symbol for host mapped
2021-05-29 17:06:28 -04:00
using ARMeilleure.Translation.PTC;
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
using System;
using System.Collections.Generic;
using System.Diagnostics;
using System.Runtime.CompilerServices;
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
namespace ARMeilleure.IntermediateRepresentation
{
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
unsafe struct Operand : IEquatable<Operand>
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
{
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
internal struct Data
{
public byte Kind;
public byte Type;
public byte SymbolType;
public ushort AssignmentsCount;
public ushort AssignmentsCapacity;
public ushort UsesCount;
public ushort UsesCapacity;
public Operation* Assignments;
public Operation* Uses;
public ulong Value;
public ulong SymbolValue;
}
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
private Data* _data;
Add multi-level function table (#2228) * Add AddressTable<T> * Use AddressTable<T> for dispatch * Remove JumpTable & co. * Add fallback for out of range addresses * Add PPTC support * Add documentation to `AddressTable<T>` * Make AddressTable<T> configurable * Fix table walk * Fix IsMapped check * Remove CountTableCapacity * Add PPTC support for fast path * Rename IsMapped to IsValid * Remove stale comment * Change format of address in exception message * Add TranslatorStubs * Split DispatchStub Avoids recompilation of stubs during tests. * Add hint for 64bit or 32bit * Add documentation to `Symbol` * Add documentation to `TranslatorStubs` Make `TranslatorStubs` disposable as well. * Add documentation to `SymbolType` * Add `AddressTableEventSource` to monitor function table size Add an EventSource which measures the amount of unmanaged bytes allocated by AddressTable<T> instances. dotnet-counters monitor -n Ryujinx --counters ARMeilleure * Add `AllowLcqInFunctionTable` optimization toggle This is to reduce the impact this change has on the test duration. Before everytime a test was ran, the FunctionTable would be initialized and populated so that the newly compiled test would get registered to it. * Implement unmanaged dispatcher Uses the DispatchStub to dispatch into the next translation, which allows execution to stay in unmanaged for longer and skips a ConcurrentDictionary look up when the target translation has been registered to the FunctionTable. * Remove redundant null check * Tune levels of FunctionTable Uses 5 levels instead of 4 and change unit of AddressTableEventSource from KB to MB. * Use 64-bit function table Improves codegen for direct branches: mov qword [rax+0x408],0x10603560 - mov rcx,sub_10603560_OFFSET - mov ecx,[rcx] - mov ecx,ecx - mov rdx,JIT_CACHE_BASE - add rdx,rcx + mov rcx,sub_10603560 + mov rdx,[rcx] mov rcx,rax Improves codegen for dispatch stub: and rax,byte +0x1f - mov eax,[rcx+rax*4] - mov eax,eax - mov rcx,JIT_CACHE_BASE - lea rax,[rcx+rax] + mov rax,[rcx+rax*8] mov rcx,rbx * Remove `JitCacheSymbol` & `JitCache.Offset` * Turn `Translator.Translate` into an instance method We do not have to add more parameter to this method and related ones as new structures are added & needed for translation. * Add symbol only when PTC is enabled Address LDj3SNuD's feedback * Change `NativeContext.Running` to a 32-bit integer * Fix PageTable symbol for host mapped
2021-05-29 17:06:28 -04:00
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
public OperandKind Kind
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
{
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
get => (OperandKind)_data->Kind;
private set => _data->Kind = (byte)value;
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
}
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
public OperandType Type
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
{
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
get => (OperandType)_data->Type;
private set => _data->Type = (byte)value;
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
}
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
public ulong Value
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
{
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
get => _data->Value;
private set => _data->Value = value;
}
CodeGen Optimisations (LSRA and Translator) (#978) * Start of JIT garbage collection improvements - thread static pool for Operand, MemoryOperand, Operation - Operands and Operations are always to be constructed via their static helper classes, so they can be pooled. - removing LinkedList from Node for sources/destinations (replaced with List<>s for now, but probably could do arrays since size is bounded) - removing params constructors from Node - LinkedList<> to List<> with Clear() for Operand assignments/uses - ThreadStaticPool is very simple and basically just exists for the purpose of our specific translation allocation problem. Right now it will stay at the worst case allocation count for that thread (so far) - the pool can never shrink. - Still some cases of Operand[] that haven't been removed yet. Will need to evaluate them (eg. is there a reasonable max number of params for Calls?) * ConcurrentStack instead of ConcurrentQueue for Rejit * Optimize some parts of LSRA - BitMap now operates on 64-bit int rather than 32-bit - BitMap is now pooled in a ThreadStatic pool (within lrsa) - BitMap now is now its own iterator. Marginally speeds up iterating through the bits. - A few cases where enumerators were generated have been converted to forms that generate less garbage. - New data structure for sorting _usePositions in LiveIntervals. Much faster split, NextUseAfter, initial insertion. Random insertion is slightly slower. - That last one is WIP since you need to insert the values backwards. It would be ideal if it just flipped it for you, uncomplicating things on the caller side. * Use a static pool of thread static pools. (yes.) Prevents each execution thread creating its own lowCq pool and making me cry. * Move constant value to top, change naming convention. * Fix iteration of memory operands. * Increase max thread count. * Address Feedback
2020-03-18 07:44:32 -04:00
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
public Symbol Symbol
{
get
{
Debug.Assert(Kind != OperandKind.Memory);
Add Profiled Persistent Translation Cache. (#769) * Delete DelegateTypes.cs * Delete DelegateCache.cs * Add files via upload * Update Horizon.cs * Update Program.cs * Update MainWindow.cs * Update Aot.cs * Update RelocEntry.cs * Update Translator.cs * Update MemoryManager.cs * Update InstEmitMemoryHelper.cs * Update Delegates.cs * Nit. * Nit. * Nit. * 10 fewer MSIL bytes for us * Add comment. Nits. * Update Translator.cs * Update Aot.cs * Nits. * Opt.. * Opt.. * Opt.. * Opt.. * Allow to change compression level. * Update MemoryManager.cs * Update Translator.cs * Manage corner cases during the save phase. Nits. * Update Aot.cs * Translator response tweak for Aot disabled. Nit. * Nit. * Nits. * Create DelegateHelpers.cs * Update Delegates.cs * Nit. * Nit. * Nits. * Fix due to #784. * Fixes due to #757 & #841. * Fix due to #846. * Fix due to #847. * Use MethodInfo for managed method calls. Use IR methods instead of managed methods about Max/Min (S/U). Follow-ups & Nits. * Add missing exception messages. Reintroduce slow path for Fmov_Vi. Implement slow path for Fmov_Si. * Switch to the new folder structure. Nits. * Impl. index-based relocation information. Impl. cache file version field. * Nit. * Address gdkchan comments. Mainly: - fixed cache file corruption issue on exit; - exposed a way to disable AOT on the GUI. * Address AcK77 comment. * Address Thealexbarney, jduncanator & emmauss comments. Header magic, CpuId (FI) & Aot -> Ptc. * Adaptation to the new application reloading system. Improvements to the call system of managed methods. Follow-ups. Nits. * Get the same boot times as on master when PTC is disabled. * Profiled Aot. * A32 support (#897). * #975 support (1 of 2). * #975 support (2 of 2). * Rebase fix & nits. * Some fixes and nits (still one bug left). * One fix & nits. * Tests fix (by gdk) & nits. * Support translations not only in high quality and rejit. Nits. * Added possibility to skip translations and continue execution, using `ESC` key. * Update SettingsWindow.cs * Update GLRenderer.cs * Update Ptc.cs * Disabled Profiled PTC by default as requested in the past by gdk. * Fix rejit bug. Increased number of parallel translations. Add stack unwinding stuffs support (1 of 2). Nits. * Add stack unwinding stuffs support (2 of 2). Tuned number of parallel translations. * Restored the ability to assemble jumps with 8-bit offset when Profiled PTC is disabled or during profiling. Modifications due to rebase. Nits. * Limited profiling of the functions to be translated to the addresses belonging to the range of static objects only. * Nits. * Nits. * Update Delegates.cs * Nit. * Update InstEmitSimdArithmetic.cs * Address riperiperi comments. * Fixed the issue of unjustifiably longer boot times at the second boot than at the first boot, measured at the same time or reference point and with the same number of translated functions. * Implemented a simple redundant load/save mechanism. Halved the value of Decoder.MaxInstsPerFunction more appropriate for the current performance of the Translator. Replaced by Logger.PrintError to Logger.PrintDebug in TexturePool.cs about the supposed invalid texture format to avoid the spawn of the log. Nits. * Nit. Improved Logger.PrintError in TexturePool.cs to avoid log spawn. Added missing code for FZ handling (in output) for fp max/min instructions (slow paths). * Add configuration migration for PTC Co-authored-by: Thog <me@thog.eu>
2020-06-16 14:28:02 -04:00
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
return new Symbol((SymbolType)_data->SymbolType, _data->SymbolValue);
}
private set
{
Debug.Assert(Kind != OperandKind.Memory);
Add Profiled Persistent Translation Cache. (#769) * Delete DelegateTypes.cs * Delete DelegateCache.cs * Add files via upload * Update Horizon.cs * Update Program.cs * Update MainWindow.cs * Update Aot.cs * Update RelocEntry.cs * Update Translator.cs * Update MemoryManager.cs * Update InstEmitMemoryHelper.cs * Update Delegates.cs * Nit. * Nit. * Nit. * 10 fewer MSIL bytes for us * Add comment. Nits. * Update Translator.cs * Update Aot.cs * Nits. * Opt.. * Opt.. * Opt.. * Opt.. * Allow to change compression level. * Update MemoryManager.cs * Update Translator.cs * Manage corner cases during the save phase. Nits. * Update Aot.cs * Translator response tweak for Aot disabled. Nit. * Nit. * Nits. * Create DelegateHelpers.cs * Update Delegates.cs * Nit. * Nit. * Nits. * Fix due to #784. * Fixes due to #757 & #841. * Fix due to #846. * Fix due to #847. * Use MethodInfo for managed method calls. Use IR methods instead of managed methods about Max/Min (S/U). Follow-ups & Nits. * Add missing exception messages. Reintroduce slow path for Fmov_Vi. Implement slow path for Fmov_Si. * Switch to the new folder structure. Nits. * Impl. index-based relocation information. Impl. cache file version field. * Nit. * Address gdkchan comments. Mainly: - fixed cache file corruption issue on exit; - exposed a way to disable AOT on the GUI. * Address AcK77 comment. * Address Thealexbarney, jduncanator & emmauss comments. Header magic, CpuId (FI) & Aot -> Ptc. * Adaptation to the new application reloading system. Improvements to the call system of managed methods. Follow-ups. Nits. * Get the same boot times as on master when PTC is disabled. * Profiled Aot. * A32 support (#897). * #975 support (1 of 2). * #975 support (2 of 2). * Rebase fix & nits. * Some fixes and nits (still one bug left). * One fix & nits. * Tests fix (by gdk) & nits. * Support translations not only in high quality and rejit. Nits. * Added possibility to skip translations and continue execution, using `ESC` key. * Update SettingsWindow.cs * Update GLRenderer.cs * Update Ptc.cs * Disabled Profiled PTC by default as requested in the past by gdk. * Fix rejit bug. Increased number of parallel translations. Add stack unwinding stuffs support (1 of 2). Nits. * Add stack unwinding stuffs support (2 of 2). Tuned number of parallel translations. * Restored the ability to assemble jumps with 8-bit offset when Profiled PTC is disabled or during profiling. Modifications due to rebase. Nits. * Limited profiling of the functions to be translated to the addresses belonging to the range of static objects only. * Nits. * Nits. * Update Delegates.cs * Nit. * Update InstEmitSimdArithmetic.cs * Address riperiperi comments. * Fixed the issue of unjustifiably longer boot times at the second boot than at the first boot, measured at the same time or reference point and with the same number of translated functions. * Implemented a simple redundant load/save mechanism. Halved the value of Decoder.MaxInstsPerFunction more appropriate for the current performance of the Translator. Replaced by Logger.PrintError to Logger.PrintDebug in TexturePool.cs about the supposed invalid texture format to avoid the spawn of the log. Nits. * Nit. Improved Logger.PrintError in TexturePool.cs to avoid log spawn. Added missing code for FZ handling (in output) for fp max/min instructions (slow paths). * Add configuration migration for PTC Co-authored-by: Thog <me@thog.eu>
2020-06-16 14:28:02 -04:00
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
if (value.Type == SymbolType.None)
{
_data->SymbolType = (byte)SymbolType.None;
}
else
{
_data->SymbolType = (byte)value.Type;
_data->SymbolValue = value.Value;
}
}
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
}
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
public ReadOnlySpan<Operation> Assignments
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
{
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
get
{
Debug.Assert(Kind != OperandKind.Memory);
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
return new ReadOnlySpan<Operation>(_data->Assignments, _data->AssignmentsCount);
}
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
}
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
public ReadOnlySpan<Operation> Uses
Add multi-level function table (#2228) * Add AddressTable<T> * Use AddressTable<T> for dispatch * Remove JumpTable & co. * Add fallback for out of range addresses * Add PPTC support * Add documentation to `AddressTable<T>` * Make AddressTable<T> configurable * Fix table walk * Fix IsMapped check * Remove CountTableCapacity * Add PPTC support for fast path * Rename IsMapped to IsValid * Remove stale comment * Change format of address in exception message * Add TranslatorStubs * Split DispatchStub Avoids recompilation of stubs during tests. * Add hint for 64bit or 32bit * Add documentation to `Symbol` * Add documentation to `TranslatorStubs` Make `TranslatorStubs` disposable as well. * Add documentation to `SymbolType` * Add `AddressTableEventSource` to monitor function table size Add an EventSource which measures the amount of unmanaged bytes allocated by AddressTable<T> instances. dotnet-counters monitor -n Ryujinx --counters ARMeilleure * Add `AllowLcqInFunctionTable` optimization toggle This is to reduce the impact this change has on the test duration. Before everytime a test was ran, the FunctionTable would be initialized and populated so that the newly compiled test would get registered to it. * Implement unmanaged dispatcher Uses the DispatchStub to dispatch into the next translation, which allows execution to stay in unmanaged for longer and skips a ConcurrentDictionary look up when the target translation has been registered to the FunctionTable. * Remove redundant null check * Tune levels of FunctionTable Uses 5 levels instead of 4 and change unit of AddressTableEventSource from KB to MB. * Use 64-bit function table Improves codegen for direct branches: mov qword [rax+0x408],0x10603560 - mov rcx,sub_10603560_OFFSET - mov ecx,[rcx] - mov ecx,ecx - mov rdx,JIT_CACHE_BASE - add rdx,rcx + mov rcx,sub_10603560 + mov rdx,[rcx] mov rcx,rax Improves codegen for dispatch stub: and rax,byte +0x1f - mov eax,[rcx+rax*4] - mov eax,eax - mov rcx,JIT_CACHE_BASE - lea rax,[rcx+rax] + mov rax,[rcx+rax*8] mov rcx,rbx * Remove `JitCacheSymbol` & `JitCache.Offset` * Turn `Translator.Translate` into an instance method We do not have to add more parameter to this method and related ones as new structures are added & needed for translation. * Add symbol only when PTC is enabled Address LDj3SNuD's feedback * Change `NativeContext.Running` to a 32-bit integer * Fix PageTable symbol for host mapped
2021-05-29 17:06:28 -04:00
{
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
get
{
Debug.Assert(Kind != OperandKind.Memory);
Add multi-level function table (#2228) * Add AddressTable<T> * Use AddressTable<T> for dispatch * Remove JumpTable & co. * Add fallback for out of range addresses * Add PPTC support * Add documentation to `AddressTable<T>` * Make AddressTable<T> configurable * Fix table walk * Fix IsMapped check * Remove CountTableCapacity * Add PPTC support for fast path * Rename IsMapped to IsValid * Remove stale comment * Change format of address in exception message * Add TranslatorStubs * Split DispatchStub Avoids recompilation of stubs during tests. * Add hint for 64bit or 32bit * Add documentation to `Symbol` * Add documentation to `TranslatorStubs` Make `TranslatorStubs` disposable as well. * Add documentation to `SymbolType` * Add `AddressTableEventSource` to monitor function table size Add an EventSource which measures the amount of unmanaged bytes allocated by AddressTable<T> instances. dotnet-counters monitor -n Ryujinx --counters ARMeilleure * Add `AllowLcqInFunctionTable` optimization toggle This is to reduce the impact this change has on the test duration. Before everytime a test was ran, the FunctionTable would be initialized and populated so that the newly compiled test would get registered to it. * Implement unmanaged dispatcher Uses the DispatchStub to dispatch into the next translation, which allows execution to stay in unmanaged for longer and skips a ConcurrentDictionary look up when the target translation has been registered to the FunctionTable. * Remove redundant null check * Tune levels of FunctionTable Uses 5 levels instead of 4 and change unit of AddressTableEventSource from KB to MB. * Use 64-bit function table Improves codegen for direct branches: mov qword [rax+0x408],0x10603560 - mov rcx,sub_10603560_OFFSET - mov ecx,[rcx] - mov ecx,ecx - mov rdx,JIT_CACHE_BASE - add rdx,rcx + mov rcx,sub_10603560 + mov rdx,[rcx] mov rcx,rax Improves codegen for dispatch stub: and rax,byte +0x1f - mov eax,[rcx+rax*4] - mov eax,eax - mov rcx,JIT_CACHE_BASE - lea rax,[rcx+rax] + mov rax,[rcx+rax*8] mov rcx,rbx * Remove `JitCacheSymbol` & `JitCache.Offset` * Turn `Translator.Translate` into an instance method We do not have to add more parameter to this method and related ones as new structures are added & needed for translation. * Add symbol only when PTC is enabled Address LDj3SNuD's feedback * Change `NativeContext.Running` to a 32-bit integer * Fix PageTable symbol for host mapped
2021-05-29 17:06:28 -04:00
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
return new ReadOnlySpan<Operation>(_data->Uses, _data->UsesCount);
}
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
}
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
public int UsesCount => _data->UsesCount;
public int AssignmentsCount => _data->AssignmentsCount;
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
public bool Relocatable => Symbol.Type != SymbolType.None;
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
[MethodImpl(MethodImplOptions.AggressiveInlining)]
public Register GetRegister()
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
{
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
Debug.Assert(Kind == OperandKind.Register);
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
return new Register((int)Value & 0xffffff, (RegisterType)(Value >> 24));
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
}
[MethodImpl(MethodImplOptions.AggressiveInlining)]
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
public MemoryOperand GetMemory()
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
{
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
Debug.Assert(Kind == OperandKind.Memory);
return new MemoryOperand(this);
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
}
public int GetLocalNumber()
{
Debug.Assert(Kind == OperandKind.LocalVariable);
return (int)Value;
}
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
public byte AsByte()
{
return (byte)Value;
}
public short AsInt16()
{
return (short)Value;
}
public int AsInt32()
{
return (int)Value;
}
public long AsInt64()
{
return (long)Value;
}
public float AsFloat()
{
return BitConverter.Int32BitsToSingle((int)Value);
}
public double AsDouble()
{
return BitConverter.Int64BitsToDouble((long)Value);
}
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
internal ref ulong GetValueUnsafe()
{
return ref _data->Value;
}
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
internal void NumberLocal(int number)
{
if (Kind != OperandKind.LocalVariable)
{
throw new InvalidOperationException("The operand is not a local variable.");
}
Value = (ulong)number;
}
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
public void AddAssignment(Operation operation)
{
if (Kind == OperandKind.LocalVariable)
{
Add(operation, ref _data->Assignments, ref _data->AssignmentsCount, ref _data->AssignmentsCapacity);
}
else if (Kind == OperandKind.Memory)
{
MemoryOperand memOp = GetMemory();
Operand addr = memOp.BaseAddress;
Operand index = memOp.Index;
if (addr != default)
{
Add(operation, ref addr._data->Assignments, ref addr._data->AssignmentsCount, ref addr._data->AssignmentsCapacity);
}
if (index != default)
{
Add(operation, ref index._data->Assignments, ref index._data->AssignmentsCount, ref index._data->AssignmentsCapacity);
}
}
}
public void RemoveAssignment(Operation operation)
{
if (Kind == OperandKind.LocalVariable)
{
Remove(operation, ref _data->Assignments, ref _data->AssignmentsCount);
}
else if (Kind == OperandKind.Memory)
{
MemoryOperand memOp = GetMemory();
Operand addr = memOp.BaseAddress;
Operand index = memOp.Index;
if (addr != default)
{
Remove(operation, ref addr._data->Assignments, ref addr._data->AssignmentsCount);
}
if (index != default)
{
Remove(operation, ref index._data->Assignments, ref index._data->AssignmentsCount);
}
}
}
public void AddUse(Operation operation)
{
if (Kind == OperandKind.LocalVariable)
{
Add(operation, ref _data->Uses, ref _data->UsesCount, ref _data->UsesCapacity);
}
else if (Kind == OperandKind.Memory)
{
MemoryOperand memOp = GetMemory();
Operand addr = memOp.BaseAddress;
Operand index = memOp.Index;
if (addr != default)
{
Add(operation, ref addr._data->Uses, ref addr._data->UsesCount, ref addr._data->UsesCapacity);
}
if (index != default)
{
Add(operation, ref index._data->Uses, ref index._data->UsesCount, ref index._data->UsesCapacity);
}
}
}
public void RemoveUse(Operation operation)
{
if (Kind == OperandKind.LocalVariable)
{
Remove(operation, ref _data->Uses, ref _data->UsesCount);
}
else if (Kind == OperandKind.Memory)
{
MemoryOperand memOp = GetMemory();
Operand addr = memOp.BaseAddress;
Operand index = memOp.Index;
if (addr != default)
{
Remove(operation, ref addr._data->Uses, ref addr._data->UsesCount);
}
if (index != default)
{
Remove(operation, ref index._data->Uses, ref index._data->UsesCount);
}
}
}
private static void New<T>(ref T* data, ref ushort count, ref ushort capacity, ushort initialCapacity) where T : unmanaged
{
count = 0;
capacity = initialCapacity;
data = Allocators.References.Allocate<T>(initialCapacity);
}
private static void Add<T>(T item, ref T* data, ref ushort count, ref ushort capacity) where T : unmanaged
{
if (count < capacity)
{
data[(uint)count++] = item;
return;
}
// Could not add item in the fast path, fallback onto the slow path.
ExpandAdd(item, ref data, ref count, ref capacity);
static void ExpandAdd(T item, ref T* data, ref ushort count, ref ushort capacity)
{
ushort newCount = checked((ushort)(count + 1));
ushort newCapacity = (ushort)Math.Min(capacity * 2, ushort.MaxValue);
var oldSpan = new Span<T>(data, count);
capacity = newCapacity;
data = Allocators.References.Allocate<T>(capacity);
oldSpan.CopyTo(new Span<T>(data, count));
data[count] = item;
count = newCount;
}
}
private static void Remove<T>(in T item, ref T* data, ref ushort count) where T : unmanaged
{
var span = new Span<T>(data, count);
for (int i = 0; i < span.Length; i++)
{
if (EqualityComparer<T>.Default.Equals(span[i], item))
{
if (i + 1 < count)
{
span.Slice(i + 1).CopyTo(span.Slice(i));
}
count--;
return;
}
}
}
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
public override int GetHashCode()
{
if (Kind == OperandKind.LocalVariable)
{
return base.GetHashCode();
}
else
{
return (int)Value ^ ((int)Kind << 16) ^ ((int)Type << 20);
}
}
Reduce JIT GC allocations (#2515) * Turn `MemoryOperand` into a struct * Remove `IntrinsicOperation` * Remove `PhiNode` * Remove `Node` * Turn `Operand` into a struct * Turn `Operation` into a struct * Clean up pool management methods * Add `Arena` allocator * Move `OperationHelper` to `Operation.Factory` * Move `OperandHelper` to `Operand.Factory` * Optimize `Operation` a bit * Fix `Arena` initialization * Rename `NativeList<T>` to `ArenaList<T>` * Reduce `Operand` size from 88 to 56 bytes * Reduce `Operation` size from 56 to 40 bytes * Add optimistic interning of Register & Constant operands * Optimize `RegisterUsage` pass a bit * Optimize `RemoveUnusedNodes` pass a bit Iterating in reverse-order allows killing dependency chains in a single pass. * Fix PPTC symbols * Optimize `BasicBlock` a bit Reduce allocations from `_successor` & `DominanceFrontiers` * Fix `Operation` resize * Make `Arena` expandable Change the arena allocator to be expandable by allocating in pages, with some of them being pooled. Currently 32 pages are pooled. An LRU removal mechanism should probably be added to it. Apparently MHR can allocate bitmaps large enough to exceed the 16MB limit for the type. * Move `Arena` & `ArenaList` to `Common` * Remove `ThreadStaticPool` & co * Add `PhiOperation` * Reduce `Operand` size from 56 from 48 bytes * Add linear-probing to `Operand` intern table * Optimize `HybridAllocator` a bit * Add `Allocators` class * Tune `ArenaAllocator` sizes * Add page removal mechanism to `ArenaAllocator` Remove pages which have not been used for more than 5s after each reset. I am on fence if this would be better using a Gen2 callback object like the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right now if a large translation happens, the pages will be freed only after a reset. This reset may not happen for a while because no new translation is hit, but the arena base sizes are rather small. * Fix `OOM` when allocating larger than page size in `ArenaAllocator` Tweak resizing mechanism for Operand.Uses and Assignemnts. * Optimize `Optimizer` a bit * Optimize `Operand.Add<T>/Remove<T>` a bit * Clean up `PreAllocator` * Fix phi insertion order Reduce codegen diffs. * Fix code alignment * Use new heuristics for degree of parallelism * Suppress warnings * Address gdkchan's feedback Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that `Operand.Value` should usually not be modified directly. * Add fast path to `ArenaAllocator` * Assembly for `ArenaAllocator.Allocate(ulong)`: .L0: mov rax, [rcx+0x18] lea r8, [rax+rdx] cmp r8, [rcx+0x10] ja short .L2 .L1: mov rdx, [rcx+8] add rax, [rdx+8] mov [rcx+0x18], r8 ret .L2: jmp ArenaAllocator.AllocateSlow(UInt64) A few variable/field had to be changed to ulong so that RyuJIT avoids emitting zero-extends. * Implement a new heuristic to free pooled pages. If an arena is used often, it is more likely that its pages will be needed, so the pages are kept for longer (e.g: during PPTC rebuild or burst sof compilations). If is not used often, then it is more likely that its pages will not be needed (e.g: after PPTC rebuild or bursts of compilations). * Address riperiperi's feedback * Use `EqualityComparer<T>` in `IntrusiveList<T>` Avoids a potential GC hole in `Equals(T, T)`.
2021-08-17 14:08:34 -04:00
public bool Equals(Operand operand)
{
return operand._data == _data;
}
public override bool Equals(object obj)
{
return obj is Operand operand && Equals(operand);
}
public static bool operator ==(Operand a, Operand b)
{
return a.Equals(b);
}
public static bool operator !=(Operand a, Operand b)
{
return !a.Equals(b);
}
public static class Factory
{
private const int InternTableSize = 256;
private const int InternTableProbeLength = 8;
[ThreadStatic]
private static Data* _internTable;
private static Data* InternTable
{
get
{
if (_internTable == null)
{
_internTable = (Data*)NativeAllocator.Instance.Allocate((uint)sizeof(Data) * InternTableSize);
// Make sure the table is zeroed.
new Span<Data>(_internTable, InternTableSize).Clear();
}
return _internTable;
}
}
private static Operand Make(OperandKind kind, OperandType type, ulong value, Symbol symbol = default)
{
Debug.Assert(kind != OperandKind.None);
Data* data = null;
// If constant or register, then try to look up in the intern table before allocating.
if (kind == OperandKind.Constant || kind == OperandKind.Register)
{
uint hash = (uint)HashCode.Combine(kind, type, value);
// Look in the next InternTableProbeLength slots for a match.
for (uint i = 0; i < InternTableProbeLength; i++)
{
Operand interned = new();
interned._data = &InternTable[(hash + i) % InternTableSize];
// If slot matches the allocation request then return that slot.
if (interned.Kind == kind && interned.Type == type && interned.Value == value && interned.Symbol == symbol)
{
return interned;
}
// Otherwise if the slot is not occupied, we store in that slot.
else if (interned.Kind == OperandKind.None)
{
data = interned._data;
break;
}
}
}
// If we could not get a slot from the intern table, we allocate somewhere else and store there.
if (data == null)
{
data = Allocators.Operands.Allocate<Data>();
}
*data = default;
Operand result = new();
result._data = data;
result.Value = value;
result.Kind = kind;
result.Type = type;
if (kind != OperandKind.Memory)
{
result.Symbol = symbol;
}
// If local variable, then the use and def list is initialized with default sizes.
if (kind == OperandKind.LocalVariable)
{
New(ref result._data->Assignments, ref result._data->AssignmentsCount, ref result._data->AssignmentsCapacity, 1);
New(ref result._data->Uses, ref result._data->UsesCount, ref result._data->UsesCapacity, 4);
}
return result;
}
public static Operand Const(OperandType type, long value)
{
Debug.Assert(type is OperandType.I32 or OperandType.I64);
return type == OperandType.I32 ? Const((int)value) : Const(value);
}
public static Operand Const(bool value)
{
return Const(value ? 1 : 0);
}
public static Operand Const(int value)
{
return Const((uint)value);
}
public static Operand Const(uint value)
{
return Make(OperandKind.Constant, OperandType.I32, value);
}
public static Operand Const(long value)
{
return Const(value, symbol: default);
}
public static Operand Const<T>(ref T reference, Symbol symbol = default)
{
return Const((long)Unsafe.AsPointer(ref reference), symbol);
}
public static Operand Const(long value, Symbol symbol)
{
return Make(OperandKind.Constant, OperandType.I64, (ulong)value, symbol);
}
public static Operand Const(ulong value)
{
return Make(OperandKind.Constant, OperandType.I64, value);
}
public static Operand ConstF(float value)
{
return Make(OperandKind.Constant, OperandType.FP32, (ulong)BitConverter.SingleToInt32Bits(value));
}
public static Operand ConstF(double value)
{
return Make(OperandKind.Constant, OperandType.FP64, (ulong)BitConverter.DoubleToInt64Bits(value));
}
public static Operand Label()
{
return Make(OperandKind.Label, OperandType.None, 0);
}
public static Operand Local(OperandType type)
{
return Make(OperandKind.LocalVariable, type, 0);
}
public static Operand Register(int index, RegisterType regType, OperandType type)
{
return Make(OperandKind.Register, type, (ulong)((int)regType << 24 | index));
}
public static Operand Undef()
{
return Make(OperandKind.Undefined, OperandType.None, 0);
}
public static Operand MemoryOp(
OperandType type,
Operand baseAddress,
Operand index = default,
Multiplier scale = Multiplier.x1,
int displacement = 0)
{
Operand result = Make(OperandKind.Memory, type, 0);
MemoryOperand memory = result.GetMemory();
memory.BaseAddress = baseAddress;
memory.Index = index;
memory.Scale = scale;
memory.Displacement = displacement;
return result;
}
}
Add a new JIT compiler for CPU code (#693) * Start of the ARMeilleure project * Refactoring around the old IRAdapter, now renamed to PreAllocator * Optimize the LowestBitSet method * Add CLZ support and fix CLS implementation * Add missing Equals and GetHashCode overrides on some structs, misc small tweaks * Implement the ByteSwap IR instruction, and some refactoring on the assembler * Implement the DivideUI IR instruction and fix 64-bits IDIV * Correct constant operand type on CSINC * Move division instructions implementation to InstEmitDiv * Fix destination type for the ConditionalSelect IR instruction * Implement UMULH and SMULH, with new IR instructions * Fix some issues with shift instructions * Fix constant types for BFM instructions * Fix up new tests using the new V128 struct * Update tests * Move DIV tests to a separate file * Add support for calls, and some instructions that depends on them * Start adding support for SIMD & FP types, along with some of the related ARM instructions * Fix some typos and the divide instruction with FP operands * Fix wrong method call on Clz_V * Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes * Implement SIMD logical instructions and more misc. fixes * Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations * Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes * Implement SIMD shift instruction and fix Dup_V * Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table * Fix check with tolerance on tester * Implement FP & SIMD comparison instructions, and some fixes * Update FCVT (Scalar) encoding on the table to support the Half-float variants * Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes * Use old memory access methods, made a start on SIMD memory insts support, some fixes * Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes * Fix arguments count with struct return values, other fixes * More instructions * Misc. fixes and integrate LDj3SNuD fixes * Update tests * Add a faster linear scan allocator, unwinding support on windows, and other changes * Update Ryujinx.HLE * Update Ryujinx.Graphics * Fix V128 return pointer passing, RCX is clobbered * Update Ryujinx.Tests * Update ITimeZoneService * Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks * Use generic GetFunctionPointerForDelegate method and other tweaks * Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics * Remove some unused code on the assembler * Fix REX.W prefix regression on float conversion instructions, add some sort of profiler * Add hardware capability detection * Fix regression on Sha1h and revert Fcm** changes * Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator * Fix silly mistake introduced on last commit on CpuId * Generate inline stack probes when the stack allocation is too large * Initial support for the System-V ABI * Support multiple destination operands * Fix SSE2 VectorInsert8 path, and other fixes * Change placement of XMM callee save and restore code to match other compilers * Rename Dest to Destination and Inst to Instruction * Fix a regression related to calls and the V128 type * Add an extra space on comments to match code style * Some refactoring * Fix vector insert FP32 SSE2 path * Port over the ARM32 instructions * Avoid memory protection races on JIT Cache * Another fix on VectorInsert FP32 (thanks to LDj3SNuD * Float operands don't need to use the same register when VEX is supported * Add a new register allocator, higher quality code for hot code (tier up), and other tweaks * Some nits, small improvements on the pre allocator * CpuThreadState is gone * Allow changing CPU emulators with a config entry * Add runtime identifiers on the ARMeilleure project * Allow switching between CPUs through a config entry (pt. 2) * Change win10-x64 to win-x64 on projects * Update the Ryujinx project to use ARMeilleure * Ensure that the selected register is valid on the hybrid allocator * Allow exiting on returns to 0 (should fix test regression) * Remove register assignments for most used variables on the hybrid allocator * Do not use fixed registers as spill temp * Add missing namespace and remove unneeded using * Address PR feedback * Fix types, etc * Enable AssumeStrictAbiCompliance by default * Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 14:56:22 -04:00
}
}